Thermaltake frio overclocking universal cpu cooler clp0564 installation

The instructions below should make it clearer: 1. Use the smallest screws to install the appropriate bracket to the heatsink base, making sure that the ends face downwards. Note that for AMD installation, an additional bolt has to screwed to the brackets 3.

After applying thermal paste to the CPU, place the heatsink on top ensuring that the mounting brackets are lined up with the mounting holes on the motherboard. Secure the backplate and heatsink with the 4 nuts. A flat headed screwdriver is recommended to tighten each corner. This also appears on the other side of the box. The features The features are listed at the back of the box, with small illustrations of the coolers key characteristics.

The main features are targeted at overclocking, aesthetics and compatibility which are achieved with the five 8mm heat pipes, two fans with voltage regulators and universal socket support. The cooler comes with two fans with the second being optional, but recommended.

A small operation diagram demonstrates how a push-pull setup will help in efficient heat dissipation. This was detailed on the last page and from those, we can immediately see the appeal of the Frio. Pros: Phenomenal cooling! Cons: None, whisper quiet. Not designed for small cases, recommended for aftermarket computer cases. Overall Review: Doing exactly what the product's name implies,Overclocking! Normal 4ghz idling is in the low 30c. Thermaltake has earned a lifetime customer, thoroughly pleased.

Sold by: Newegg Shipped by Newegg. This item is currently out of stock and it may or may not be restocked. Out of Stock. Add To Wish List Found on 1 wish list. Are you an E-Blast Insider? Get Educated. Thermaltake continues to bring innovative solutions to CPU cooling challenges. The copper base rests directly against the chip to draw away damaging heat.

Five seamlessly embedded heatpipes penetrate the cooling fin array above for optimal heat transfer and dissipation. Dual fans, one on each side, move large amount of cooling air over the convection fins at quiet noise level, and a fan control knob allows you to adjust the fan speed to reach a perfect balance between performance and noise.

For ultra-cool protection and forward-thinking style, the Thermaltake Frio blows away the competition. Superior Heat Dissipation The copper base and five 8mm copper heatpipes conduct heat fast; high-density convection fins maximize heat dissipation area, plus dual mm fans to deliver optimal cooling performance. Adjustable Fan Speed The Thermaltake CLP features a VR fan controller so you can fine tune the fan speeds for the optimum balance between cooling performance and noise level.

Robert H. Eggxpert Review. Did you? Place one white washer on each bolt and remove the protective cover from the base of the Frio. All Rights Reserved. Put the mm fan on the top of the fan frame and pull the soft mounts and move them into the holes in the corners of the fan. Fasten the AMD clip to pre-drilled screw holes in the base of the Frio with a screw driver.

Worldwide sites. India Thailand Poland Latam Nordic.